Have you recently purchased a Belkin router and would like to know how to factory reset it? It can be difficult if you have never done so before. First of all, it is important to understand that resetting the Belkin router will not change the default setting on the device. The reset function only changes the settings on the router itself, not the OS (operating system).

192.168.L.L is very useful to know, many guides online will put-on you very nearly 192.168.L.L, however i suggest you checking this 192.168.L.L . I used this a couple of months ago like i was searching upon google for 192.168.L.L

 

Normally, the Belkin router will go into reset mode automatically when you turn the power source on. However, it may also choose to reset if there is an error or problem with the reset port that is why it is important to recognize when this happens. The Belkin router reset button is located in the upper left corner of your console. It is usually small and round. You should try to push the button several times to see if the resetting process has succeeded.

 

If the router does not go into reset mode by pressing the reset button, you need to check the reset port first. This is usually easy to do. Sometimes, the reset port may get damaged or corrupted. In this case, you need to replace it with a new one.

How to Factory Reset Belkin Router

 

If your router does not enter into reset mode by pressing the reset button, check the power source. Sometimes, the power source could be bad and it will not be able to enter the mode. If this is the case, the other option is to factory reset your Belkin router. To do this, connect a jumper from the power source to the reset port. This will allow your router to enter into the reset mode.

 

The next step is to make sure that the wireless card is working properly. You can do this by searching for WAP. It should be labeled as Wireless Access Card in the device manager. If it is not working properly, try to replace it with a new one. Remember to disconnect the power source before trying to reset your router.

 

If everything was okay, now you can start to reset your Belkin router using the steps mentioned earlier. When you want to Factory reset your Belkin router, you need to turn the router off. Then, remove the battery from it. After this, plug the power cord to a USB port of your computer and then insert it in the back of the router.

 

Now, you need to open the case of the router. When you are opening it, you need to be very careful. You have to make sure that you don't damage anything when doing this process. You need to pull out all the circuits to see whether they are working properly. If you find out that there is something wrong with the circuits, you can try to replace them. The Belkin router usually has reset/switch port for different connections and models.

 

When you are done, remove all the components from your Belkin router. Put them back again into the box where you received them. You can connect the power source back to the computer now. When you are finished, you should check whether your Belkin router works as well as before.

 

In some cases, your Belkin router will not reset even though you have followed all the steps mentioned above. The reason behind this issue is that the reset port on your modem does not function correctly. This is a common problem that happens with some models of Belkin routers. To reset your modem, you need to connect the power cable to the reset port and then press the reset button. If you find that the reset button is not pressed, then the cable is probably faulty.

 

It is important to find out the technical details of your Belkin router before you reset it. Find out if you need to do any modifications in order to make it work correctly. If you need to reset your router, you should try to reset it by hand first. When you are handling the reset button, you should make sure that you keep all wires away from your hands because they can be damaged easily.

 

If everything is working fine, then you can try resetting your Belkin router by using the factory reset port. First disconnect the power cable and then plug the reset port into the back of the Belkin router. You may find instructions on the manufacturer's website on how to reset your router. After you have reset your router, you need to follow the instructions carefully to return back the reset status of the device.

Thanks for checking this article, If you want to read more blog posts about how to factory reset belkin router don't miss our homepage - J Scripts We try to update the site bi-weekly